50 in. model: S11-04653-20

57 in. model: S11-04653-21

Assembled mount with lower link, upper link, gas springs, display panel and pull cable.

Lower Gas Spring Control Arm

S00-01000-18

Includes retaining screw.

Lower Gas Spring

S00-01000-37

Includes pivot pin and screws.

Replacing the Lower Gas Spring

Lower Link

50 in. model: S00-01000-81

57 in. model: S00-01000-82

Assembled lower link with pull cable and latch mechanism. Does not include latch tension spring and hook.

Removing the Lower Link from the Mount Base

Display Panel

S00-01000-74

Replacing the Display Panel

Upper Link

50 in. model: S00-01000-03

57 in. model: S00-01000-08

Does not include display panel.

Removing the Upper Link from the Mount Base

Upper Gas Spring Control Arm

S00-01000-17

Includes retaining screw.

Upper Gas Spring

50 in. model: S00-01000-38

57 in. model: S00-01000-40

Includes pivot pin and screws.

Replacing the Upper Gas Spring

Mount Base

50 in. model: S00-01000-05

57 in. model: S00-01000-10

Includes mount shrouds, rails, bumper and stow support.

S00-01000-25

Screws for securing the upper and lower gas springs to the lower link.

S00-01000-27

Brackets for securing the power and transducer cables to the mount.

S00-01000-24

¹/₄–20 screws, nuts and washers for mounting the trolling motor.

50 in. model: S00-01000-45

57 in. model: S00-01000-11

Complete latch mechanism and pull cable guide.

Includes two sets of cotter pins. For the Force^® Pro trolling motor, you should use the pins in bag A.

Replacing the Latch Mechanism in the Lower Link

S00-01000-58

Cotter pins for securing the latches and the pull cable to the latch release rod.

Includes two sets of cotter pins. For the Force Pro trolling motor, you should use the pins in bag A.

S00-01658-00

Latch mechanism tension spring and S-hook.

50 in. model: S00-01000-33

57 in. model: S00-01000-34

Replacing the Mount Rails

S00-01000-14

Replacing the Mount Shrouds

S00-01000-19

Replacing the Mount Bumper

S00-01000-47

Replacing the Stow Support