Skip to main content

Removing the Upper Link from the Mount Base

Before you can remove the upper link from the mount base, you must disconnect the upper link from the steering system (Disconnecting the Upper Link from the Steering System ).

  1. Using an 8 mm hex bit or wrench, loosen the two bolts that secure the upper link to the mount base.

    Disconnecting upper link from the mount base
    TIP: The bolts that secure the upper link to the mount base are fastened very securely at the factory. You may need to use a ratchet to hold the 8 mm hex bit to provide the leverage needed to loosen these bolts.
  2. Remove the bolts, bushings, and washers from both sides of the upper link.
GUID-4961C943-E6C7-423B-AC7D-40EC5C713247 v1
March 2025
© 2025 Garmin Ltd.