When tournament mode is enabled, the LED is solid blue.

When applying a firmware update to the rangefinder, the LED flashes blue (Product Updates).

Press to enable tournament mode and turn off the PlaysLike feature (Using Tournament Mode).

Hold to open setup mode (Using Setup Mode).

Press to wake up the device (Waking Up the Device).

Press to range with the laser for 3 seconds or until the rangefinder locks onto the pin (Measuring the Distance to a Target, Measuring the Distance to the Pin).

Hold for up to 8 seconds or until the rangefinder locks onto the pin to range with the laser.

Rotate the eyepiece to focus the screen (Adjusting the Eyepiece).

Remove to install or replace the CR2 battery.

View manufacturer's identification and certification.