Installing the Propeller Drive Motor on the Shaft
You must use new hardware and seals when reinstalling the propeller drive motor. Reusing old hardware and seals can lead to water ingress and damage to the motor. Replacement screws, seals, and a grease packet are included in the propeller drive motor hardware service kit (S00-01000-35).
- Install the propeller drive motor on the shaft (Installing the Propeller Drive Motor).
- If necessary, install the cable gland and recessed nut (Installing the Cable Gland and Recessed Nut).
- Install the nose cone and skeg on the propeller drive motor (Installing the Nose Cone and Skeg).