Skip to main content

Installing the Nose Cone and Skeg

  1. Place the nose cone onto the propeller drive motor.
  2. Using a 4 mm hex bit or wrench, secure the front of the nose cone to the propeller drive motor using the two existing screws.

    Exploded view of the skeg and nose cone with callouts
  3. Using a 3 mm hex bit or wrench, secure the bottom of the nose cone to the propeller drive motor using the existing screw.
  4. Using a 4 mm hex bit or wrench, secure the skeg to the bottom of the propeller drive motor using the four existing screws.
GUID-4961C943-E6C7-423B-AC7D-40EC5C713247 v1
March 2025
© 2025 Garmin Ltd.