Skip to main content

Installing the Replacement Transducer

After you remove the existing transducer, perform these actions to install the replacement transducer.

  1. Install the new transducer in the nose cone (Installing the Transducer).
  2. Install the propeller drive motor on the shaft (Installing the Propeller Drive Motor).
  3. Install the nose cone and skeg on the propeller drive motor (Installing the Nose Cone and Skeg).
GUID-36A086C0-41D9-4098-8234-D26188424460 v2
March 2025
© 2025 Garmin Ltd.