Skip to main content

Replacing the LNC

  1. Remove the antenna position sensor board (Removing the Antenna Position Sensor Board).
  2. Remove the magnetron (Removing the Magnetron).
  3. Remove the LNC and the circulator/waveguide assembly (Removing the LNC and the Circulator).
  4. Install the new LNC and the circulator/waveguide assembly (Reinstalling the LNC and the Circulator).
  5. Reinstall the magnetron (Reinstalling the Magnetron)).
  6. Reinstall the antenna position sensor board (Reinstalling the Antenna Position Sensor Board).
GUID-E0CF67E5-B8D5-4CBB-8E06-00CC9CEB7DE9 v1
November 2025
© 2025 Garmin Ltd.