Preparing for a Shot

Failing to take one or more of the following actions could result in possible property damage or personal injury while using the device indoors:

Ensure there is adequate ceiling height and that no objects can obstruct your backswing or follow through.
Ensure that any net or impact screen is set up with adequate free space behind the net or screen.
Ensure that any net or impact screen is high enough and extended enough to account for high-lofted shots or any errant shots.
Ensure that any net or enclosure frame is padded to help reduce ball ricochet.

Place the launch monitor approximately 1.5 ft. (0.5 m) to the side of the desired tee location (Launch Monitor Placement Considerations).
Press the button to turn on the launch monitor.
Start a golf simulator game mode (Using the Golf Simulator Features).
Place the ball at the desired tee location.
If necessary, adjust the position of the ball so it appears within the hitting area on the launch monitor's display.

TIP: You can move the ball to any location within the hitting area. It may be helpful to move it during your session if the current location becomes worn.

NOTE: The shape of the hitting area varies depending on whether club data is enabled.
If necessary, adjust the target alignment (Adjusting the Target Alignment).

NOTE: The target line is parallel to the front of the device by default. The ball and club angles are measured parallel to the target line.
Wait for the status LED to become solid green, and take a shot.

Approach® R50