Configuring Bow Lock
The bow lock feature uses the defined length of your vessel to project the location of the bow when using Bow Lock to hold your position with the bow as the anchor point. The default setting for the vessel length is 12 ft. (3.7 m), and you can adjust this value.
For the best performance of the Bow Lock feature, you must adjust the Vessel Length setting if it is different than the default length of 12 ft. (3.7 m).
-
On the remote control, select
> Settings > Trolling Motor > Vessel Length.
-
Press
or 
to increase or decrease the vessel length value.
-
Press
to confirm the selection.