Customizing Headlight Settings with Your Edge Bike Computer
The headlight can be programmed to emit light at varying degrees of brightness and flash at various intervals. Contact your healthcare provider if you have epilepsy or are sensitive to bright or flashing lights.
Before you can customize Varia™ device settings with your Edge® bike computer, you must pair the devices (Pairing the Varia Vue with a Compatible Edge Bike Computer).
- From the Sensors menu, select Lights.
-
Select an option:
-
Select Enable to enable the light network.
-
Select to set the light intensity mode for all lights in your network (Light Mode Settings).
-
Select to turn on the headlight automatically when the timer starts or when the Edge bike computer turns on.
-
Select to check that each light in your network is set up correctly (Testing the Light Network).
-
Select to adjust the headlight intensity automatically based on the rate of speed. A high intensity is used at high speeds, and a low intensity is used at low speeds (Automatic Beam Intensity).
-
Select a light to view device information and customize each light in your network (Light Network Settings).
-
Light Network Settings
From the Sensors menu, select Lights, and select a paired light.
- Sensor ID
-
Displays the sensor's identification number.
- Connection Type
-
Displays the technology that is used to connect to the sensor.
- About
-
Displays device and software information.
- Camera Settings
-
Sets the video resolution and recording mode, turns off audio recording, turns on image stabilization, and more.
- Light Mode
-
Sets the light intensity and pattern mode, or turns off the light.
NOTE: This setting is available when you select the Individual light mode setting (Light Mode Settings). - Remove
-
Allows you to delete a paired light from the network.
Light Mode Settings
From the Sensors menu, select .
- Auto
-
Automatically adjusts the light intensity and light mode based on the ambient light and time of day. This mode is recommended for commuting or road rides.
- High Visibility
-
Sets the light intensity to flash mode or the brightest setting available.
- Trail
-
Automatically adjusts the light intensity and light mode based on the ambient light and time of day. This mode is recommended for trail riding.
- Individual
-
Allows you to customize the light intensity and pattern mode for each light in your network (Light Network Settings).