GOS 10 Hub Wiring Harness
You must connect the appropriate wires from the included wiring harness to power and to the wiring of an existing kill switch or to the engine ignition wire.
|
Item |
Description |
|---|---|
|
|
GOS™ 10 hub wiring harness |
|
|
Engine cutoff wires (Garmin OnBoard Engine Shutoff Connections) |
|
|
Alarm buzzer (Installing the Audible Alarm Buzzer) The black wire from the alarm buzzer is connected to the gray wire from the harness at the factory. The red wire from the alarm buzzer is connected to the power (+) wire from the harness at the factory. |
|
|
1A 125V inline fuse |
|
|
Power wires (GOS 10 Hub Power Connection) Red: positive (+) Black: ground (−) |
|
|
System bypass module (Bypassing the System from the GOS 10 Hub) |
Engine Cutoff Wires
|
Wire Function |
Wire Color |
|---|---|
|
Engine 1: Close-to-stop |
White |
|
Engine 2: Close-to-stop |
Yellow |
|
Engine 3: Close-to-stop |
Green |
|
Engine 4: Close-to-stop |
Purple |
|
Engine 1: Open-to-stop in |
Orange |
|
Engine 1: Open-to-stop out |
Pink |
|
Engine 2: Open-to-stop in |
Blue |
|
Engine 2: Open-to-stop out |
Brown |