Skip to main content

Entering a COM1 or COM2 Frequency From the CNS Bar Using the Find Function:

  1. Touch the COM1 or COM2 Standby Button to select the desired radio for tuning, opening the 'COM Standby' numeric keypad.
  2. Touch the Find Button.

    Or:

    1. Touch the Menu Button

      Or:

      Touch the MENU Softkey (on the side of the bezel with the 'COM Standby' numeric keypad open).

    2. Touch the Find Button.
  3. Touch the tab for the desired type of frequency (Nearest, Flight Plan, or Presets).
    1. If multiple frequencies are available while using the Find Function, "Multiple" will appear in the button on the list. If required touch the location to choose from the Frequencies list for that location.
  4. Touch the desired frequency.
  5. Touch the Enter Button to accept the new frequency and place it in the standby frequency position

    Or:

    Touch the Transfer Button to accept the new frequency and place it in the active frequency position.

190-03123-01 Rev B
July 2026
© 2026 Garmin Ltd.