Skip to main content

Configuring the Device

Depending on your local network, you may need to create firewall or proxy exemptions (Firewall Exceptions) for this device. If necessary, consult your network administrator about your network settings.

  1. Prepare the device for configuration (Getting Started).
    NOTE: Use the connected USB mouse to complete the configuration process.
  2. Select Play symbol.
  3. Select a language.
  4. Select Configure Wireless Networks.
  5. Select an option:

    • To connect to a standard wireless network, select the SSID, and enter the password if necessary.

    • To add a wireless network manually by specifying advanced networking settings, select Plus symbol .

    • To connect to a wireless network using WPS, select Menu symbol and either scan for a WPS-enabled network or enter a WPS PIN.

    NOTE: This device uses the default Android™ 4.2 network application to connect to and configure your wireless network settings.

    The status of the selected network changes to Connected.

  6. Select Next.
  7. Select Right arrow symbol.
  8. Select a time server, and select Right arrow symbol (Specifying a Custom Time Server).
  9. Select Select Time Zone, and select your local time zone.
  10. If necessary, select Configure Daylight Saving Settings to change your local daylight saving time preferences (Daylight Saving Time Settings).
  11. Select Right arrow symbol.
  12. Select a software update preference, and select Right arrow symbol (Setting Software Update Preferences).
  13. Enter the device lock password, and select Save.

    The device is password protected so only authorized administrators can change the configuration.

  14. Select Right arrow symbol.
  15. Register the device to one or more Garmin Connect™ accounts (Managing Garmin Connect Registrations).

The device is configured and is ready for use.

Copyright © Garmin. All rights reserved.GUID-56FCE356-9562-4F5F-9C28-FC28FBDE2767 v4