Pairing Vector with the Edge 1000

Bring the Edge^® device within range (3 m) of the sensor.

NOTE: Stay 10 m away from other ANT‍+^® sensors while pairing.
Turn on the Edge device.
From the home screen, select > Sensors > Add Sensor > Power.
Rotate the crank arm a few times.
Select your sensor.

When the sensor is paired with your Edge device, a message appears, and the sensor status is Connected. You can customize a data field to display Vector™ data.

Vector™ 3 and Vector™ 3S

Previous Topic

Next Topic

Download PDF

Print Page

Pairing Vector with the Edge 1000