Pedal Status LED

LED flashes indicate a system issue that requires your attention. Error codes are cleared after the issue is resolved and you have synced your Vector™ system with the Garmin Connect™ app or your Edge® device. The LED is located on the inboard of the spindle Callout number one.
Device with a glyph

LED Activity

Status

1 red flash

The Vector system is active and working properly.

3 green flashes every 10 seconds

The pedal is searching for the other pedal.

Alternating red and green flashes

A software update is in progress.

20 green flashes

The software update was successful.

20 red flashes

The software update failed.

1 red flash every 10 seconds

The pedal batteries are low.

Copyright © Garmin. All rights reserved.GUID-297604DF-2345-43A4-80D2-908E16676B29 v6