Pairing Varia Bike Lights with Your Edge 1000

Before you can pair the devices, you must update the Edge® software.

  1. Bring the Edge device within range (3 m) of the sensor.
    NOTE: Stay 10 m away from other ANT‍+® bike lights while pairing.
  2. Turn on the Edge device.
  3. From the home screen, select Setup symbol > Sensors > Add Sensor > Search All.
  4. Turn on the Varia™ device.
  5. Select the Varia device key to enter smart mode.

    The status LED flashes blue.

  6. Select your sensor.

When the sensor is paired with your Edge device, the status icon appears solid on the connections page.

Copyright © Garmin. All rights reserved.GUID-60958DB2-BC85-4B92-BA3A-3EEAC2596D48 v4