Skip to main content

Pairing the Remote with Your Varia Device

The first time you connect the Varia™ remote to your Varia device, you must pair the remote with your device.

  1. Bring the remote within 1 m (3 ft.) of the device.
    NOTE: You must stay 10 m (33 ft.) away from other ANT‍+® sensors while pairing.
  2. On the Varia device, hold the device key for 1 second to turn it on.
  3. Select the Varia device key to enter smart mode.

    The status LED starts flashing blue.

  4. On the Varia remote, hold two keys simultaneously until the status LED starts alternating green and red, and release the keys.

    The remote searches for your Varia device. After the remote pairs successfully, the status LED flashes green 12 times.

After the remote is paired, it connects to your device whenever the device is in range and turned on in smart mode. You may need to wake the remote by selecting any key.

Copyright © Garmin. All rights reserved.GUID-60958DB2-BC85-4B92-BA3A-3EEAC2596D48 v4