Skip to main content

Preparing a USB Flash Drive for Updates

To download software updates onto a USB flash drive, you must prepare it. This allows the Garmin Express™ software to recognize the USB flash drive and deliver the correct software for the dock.

  1. Turn on the vehicle, and place the RV HUB remote in the RV HUB dock.

    The dock must be receiving power to prepare the USB flash drive.

    WARNING

    Do not attempt to update the software while operating the vehicle.

  2. Select an option:

    • Locate the media USB port in your vehicle.

      For more information, see your vehicle owner's manual.

    • Locate the 2.1 A USB port on the back of the RV HUB dock.

      For more information, see the RV-BBT600 Series Installation Instructions.

  3. Plug the USB flash drive into the USB port.
  4. Select Music > Context menu > Settings > Update > Create Card.

    A message appears when the dock has finished preparing the USB flash drive to receive the software updates.

After the USB flash drive is prepared, you should remove the flash drive and download the software updates using Garmin Express (Downloading Software Updates to the Prepared USB Flash Drive).

Copyright © Garmin. All rights reserved.GUID-0E9D9439-6B91-4B50-8492-83D80CC16653 v4