To communicate with other Rino® users or compatible radio devices, you must be on the same channel and code (Channels and Codes).

  1. Hold PTT.
  2. Speak into the front of the device.
  3. After you are finished speaking, release PTT.

    The radio transmits your position information. You cannot hear incoming transmissions until your transmission is complete. A roger tone sounds on your radio and on the radios receiving your transmission to confirm that the transmission is complete.

    NOTE: You can change or disable the roger tone (Setting the Device Tones).
Copyright © Garmin. All rights reserved.GUID-35474A49-ADDB-451D-A6DA-AA003B2A4ACC v7