Channels and Codes
To communicate with other Rino® and GMRS, GMRS/FRS, or UHF CBRS/PRS radio users, you must be on the same channel.
Rino devices are compatible with third-party radios as long as the radios use standard frequencies. A list of all frequencies used by this device is available in the product specifications (Radio Frequency Charts).
|
United States Channel Number |
Channel Type |
|---|---|
|
1 through 22 |
GMRS channels |
|
15R through 22R |
Repeater channels |
|
Canada Channel Number |
Channel Type |
|---|---|
|
1 through 7 |
GMRS and FRS channels |
|
8 through 14 |
FRS channels |
|
15 through 22 |
GMRS channels |
|
15R through 22R |
Repeater channels |
|
Australia and New Zealand Channel Number |
Channel Type |
|---|---|
|
9 through 30, 39, 40, 49 through 60, 64 through 70, 79, 80 |
UHF CBRS/PRS channels |
|
1R through 8R (31 through 38), 41R through 48R (71 through 78) |
CBRS/PRS repeater channels1 |
|
5 and 35 |
Reserved channels (emergency) |
|
22 and 23 |
Reserved channels (data only) |
|
61 through 63 |
Reserved channels (for future use) |
Squelch codes allow you to filter calls from other users on the same channel, so you hear only the radios you want to hear. Calls on the channel that are not using the same squelch code in the same squelch tone mode are ignored.
|
Squelch Tone Mode |
Squelch Codes |
|---|---|
|
Continuous Tone Controlled Squelch System (CTCSS) |
1 through 38 |
|
Digital-Coded Squelch (DCS) |
Listed in the product specifications (Radio Frequency Charts) |