Skip to main content

Installing AA Batteries

Instead of the optional NiMH battery pack (Installing a NiMH Battery Pack), you can use two alkaline, NiMH, or lithium batteries. This is useful when you are on the trail and cannot charge the NiMH battery pack. Use NiMH or lithium batteries for best results.

NOTE: Standard alkaline batteries are not recommended for the Oregon® 750 models when using the camera feature.
  1. Turn the D-ring counter-clockwise, and pull up to remove the cover.
  2. Insert two AA batteries, observing polarity.

    Close-up view of two AA batteries being installed into the device
  3. Replace the battery cover, and turn the D-ring clockwise.
  4. Hold Power.
  5. Select Setup > System > Battery Type.
  6. Select Alkaline, Lithium, NiMH, or Precharged NiMH.
Copyright © Garmin. All rights reserved.GUID-7A6111EB-23E4-4F4E-9CE8-2A69DC7991D3 v3