Skip to main content

Transferring Data to an Inspector Using a USB Device

You can transfer data to a USB mass storage device to provide it to an authorized safety official. The Garmin eLog™ adapter supports USB mass storage devices formatted using the FAT32 file system.

  1. From the Garmin eLog app, select Inspection.
  2. Select an option:

    • For a device with Android™, select Share > Yes.

    • For an Apple® device, select Send Report > Yes.

  3. If necessary, enter an annotation.
  4. Select USB.
  5. Connect a USB mass storage device to the USB port on your Garmin eLog adapter.

    The adapter glows green when it is ready to send the inspection report.

  6. Enter your password.
  7. Select Send to USB Device.

    The Garmin eLog app notifies you when the transfer is complete.

  8. Remove the USB mass storage device from the adapter.
Copyright © Garmin. All rights reserved.GUID-837BBEE6-5ECF-49E9-BF77-46BFA213DBAE v6