Skip to main content

Installing the Battery

  1. Locate the circular battery cover Callout number one on the back of the Keep Away Tag sensor.

    Battery compartment with callouts
  2. Twist the cover counter-clockwise until it is loose enough to remove.
  3. Remove the cover.
  4. Place the battery into the cover with the positive side facing the inside of the cover.
    NOTE: Do not damage or lose the O-ring gasket.
  5. Replace the cover by aligning the dots Callout number two and rotating clockwise.

When paired with a compatible dog collar device, the Garmin Canine™ app indicates when less than 1 wk. battery life remains for the sensor.

TIP: To replace the battery, you can use a piece of tape Callout number three or a magnet to remove the battery from the cover.
Removing the battery from the device with a callout
Copyright © Garmin. All rights reserved.GUID-D68C0976-5A0D-443B-A8C9-0DFFF00DF9A2 v2