Skip to main content

Adding a Dog to the Alpha 100F Handheld Using Wireless Pairing

  1. If the dog collar device is on, turn off the dog collar device (Turning Off the Devices).
  2. Hold Power until the dog collar device emits two series of beeps (about 2 seconds), and then release Power.

    The status LED flashes rapidly in green. The dog collar device is now ready to be linked, or paired, with a handheld device.

  3. On the handheld device, select Dog List > Add Dog.
  4. Bring the dog collar device near the handheld device, and select Yes.
  5. After successfully adding the dog collar device, enter the name of the dog, and select Checkmark > OK.
Copyright © Garmin. All rights reserved.GUID-E3F46E61-51AE-4D62-A595-91E3955DFC8C v2