Upgrading Your Rally 100 to a Dual Sensing System
Before you install the new right pedal, the left pedal must be paired and connected to a compatible Edge® device or the Garmin Connect™ app.
- Review the Rally™ installation instructions (Installing the Rally Components).
- Remove the existing right pedal.
- Install the new right pedal (Installing the Pedals).
- Rotate the crank arm.
-
Select an option to connect the right pedal to the left pedal:
-
From your compatible Edge device, select
> Sensors, select your sensor, select
, and enter the sensor ID found on the pedal.
-
From the Garmin Connect app device settings, enable the Right Pedal, and enter the sensor ID found on the pedal.
-