Skip to main content

Completing the Trolling Motor Service

After you replace the transducer, you must perform these actions to complete the trolling motor service.

  1. Install the shaft in the steering system (Reinstalling the Shaft).
  2. Install the shaft cap on the shaft (Installing the Shaft Cap).
  3. Install the transducer cable in the shaft cap (Installing the Transducer Cable in the Shaft Cap).
  4. Connect the cables in the shaft cap (Connecting the Cables in the Shaft Cap).
  5. Close the shaft cap (Closing the Shaft Cap).
  6. Connect the motor to the power source.
GUID-EDBE2B74-2479-4B1A-AA6B-562A4F77EE8E v3
March 2025
© 2019 Garmin Ltd.