Data Fields
Some data fields require ANT+® or Bluetooth® accessories to display data. Some data fields appear in more than one category on the device.
- %Max Heart Rate
-
The percentage of maximum heart rate.
- 24-Hour Maximum Temperature
-
The maximum temperature recorded in the last 24 hours from a compatible temperature sensor.
- 24-Hour Minimum Temperature
-
The minimum temperature recorded in the last 24 hours from a compatible temperature sensor.
- 3s Power
-
The 3-second moving average of power output.
- Asc. to Next Course Pt.
-
The remaining ascent to the next point on the course.
- Ascent Remaining
-
During a course, the remaining ascent when you are using an elevation target.
- Assist Mode
-
The current eBike assistance mode.
- Avg Cadence
-
Cycling. The average cadence for the current activity.
- Avg Heart Rate
-
The average heart rate for the current activity.
- Avg Lap Time
-
The average lap time for the current activity.
- Avg Power
-
The average power output for the current activity.
- Avg Speed
-
The average speed for the current activity.
- Battery Level
-
The remaining battery power.
- Battery Status
-
The remaining battery power of a bike light accessory.
- Beam Angle Status
-
The headlight beam mode.
- Cadence
-
Cycling. The number of revolutions of the crank arm. Your device must be connected to a cadence accessory for this data to appear.
- Cadence Graph
-
A line graph showing your cycling cadence values for the current activity.
- Calories
-
The amount of total calories burned.
- Course Pt. Distance
-
The remaining distance to the next point on the course.
- Destination Location
-
The position of your final destination.
- Dist. to Point
-
The remaining distance to the next point.
- Distance
-
The distance traveled for the current track or activity.
- Distance to Destination
-
The remaining distance to the final destination. You must be navigating for this data to appear.
- Distance to Next
-
The remaining distance to the next waypoint on the route. You must be navigating for this data to appear.
- eBike Battery
-
The remaining battery power of an eBike.
- Elapsed Time
-
The total time recorded. For example, if you start the activity timer and ride for 10 minutes, then stop the timer for 5 minutes, then start the timer and ride for 20 minutes, your elapsed time is 35 minutes.
- Elevation
-
The altitude of your current location above or below sea level.
- Elevation Graph
-
A line graph showing your current elevation, total ascent, and total descent for the current activity.
- ETA at Destination
-
The estimated time of day when you will reach the final destination (adjusted to the local time of the destination). You must be navigating for this data to appear.
- ETA at Next
-
The estimated time of day when you will reach the next waypoint on the route (adjusted to the local time of the waypoint). You must be navigating for this data to appear.
- GPS Signal Strength
-
The strength of the GPS satellite signal.
- Grade
-
The calculation of rise (elevation) over run (distance). For example, if for every 3 m (10 ft.) you climb you travel 60 m (200 ft.), the grade is 5%.
- Heading
-
The direction you are moving.
- Heart Rate
-
Your heart rate in beats per minute (bpm). Your device must be connected to a compatible heart rate monitor.
- Heart Rate Graph
-
A line graph showing your current, average, and maximum heart rate values for the current activity.
- Heart Rate Zone
-
The current range of your heart rate (1 to 5). The default zones are based on your user profile and maximum heart rate (220 minus your age).
- Kilojoules
-
The accumulated work performed (power output) in kilojoules.
- Lap Ascent
-
The vertical distance of ascent for the current lap.
- Lap Cadence
-
Cycling. The average cadence for the current lap.
- Lap Descent
-
The vertical distance of descent for the current lap.
- Lap Distance
-
The distance traveled for the current lap.
- Lap Heart Rate
-
The average heart rate for the current lap.
- Lap Power
-
The average power output for the current lap.
- Laps
-
The number of laps completed for the current activity.
- Lap Speed
-
The average speed for the current lap.
- Lap Time
-
The stopwatch time for the current lap.
- Light Mode
-
The light network configuration mode.
- Lights Connected
-
The number of connected lights.
- Max. Power
-
The top power output for the current activity.
- Max. Speed
-
The top speed for the current activity.
- Next Waypoint
-
The next point on the route. You must be navigating for this data to appear.
- Odometer
-
A running tally of distance traveled for all trips. This total does not clear when resetting the trip data.
- Power
-
The current power output in watts.
- Power Graph
-
A line graph showing your current, average, and maximum power output values for the current activity.
- Power Zone
-
The current range of power output (1 to 7) based on your FTP or custom settings.
- Shifting Advice
-
The recommendation to shift up or down based on your current effort. Your eBike must be in manual shifting mode.
- Smart Travel Range
-
The estimated remaining distance the eBike will provide assistance, taking into account the local terrain.
- Speed
-
The current rate of travel.
- Speed Graph
-
A line graph showing your speed for the current activity.
- Sunrise
-
The time of sunrise based on your GPS position.
- Sunset
-
The time of sunset based on your GPS position.
- Temperature
-
The temperature of the air. Your body temperature affects the temperature sensor.
- Time of Day
-
The time of day based on your current location and time settings (format, time zone, daylight saving time).
- Timer
-
The stopwatch time for the current activity.
- Time to Destination
-
The estimated time remaining before you reach the destination. You must be navigating for this data to appear.
- Time to Next
-
The estimated time remaining before you reach the next waypoint in the route. You must be navigating for this data to appear.
- Time to Point
-
The remaining time to the next point.
- Total Ascent
-
The total elevation distance ascended since the last reset.
- Total Descent
-
The total elevation distance descended since the last reset.
- Trainer Controls
-
During a workout, the resistance force applied by an indoor trainer.
- Travel Range
-
The estimated distance you can travel based on the current eBike settings and remaining battery power.