Skip to main content

Resetting the Pedals to Factory Defaults

  1. Rotate the cranks to wake up the pedals.
    NOTE: In a Rally™ 210 system, both pedals must be turned on to perform a factory reset.
  2. In the Garmin Connect™ app, select Menu symbol > Garmin Devices > Rally 110/210 > System.
  3. Select Factory Reset.

    While resetting the pedals, the status LED flashes Red Orange Green.

After completing the factory reset, the pedals go into secure pairing mode, and the status LED flashes Purple.

NOTE: You must delete the pedals from your mobile device Bluetooth® settings before pairing the pedals with the Garmin Connect app again (Pairing with the Garmin Connect App).
GUID-E17670DF-416F-455E-8444-29845F375EBD v1
August 2025
© 2025 Garmin Ltd.