Status LED

The status LED is located on the threaded ends of the spindles.

NOTE: On the Rally™ 110 pedal power meter, only the left pedal has a status LED.


Flashes	The battery level is good (up to 90 hr. remaining).
Flashes	The battery level is low (up to 12 hr. remaining).
Flashes	The battery level is critical. (less than 5 hr. remaining).
Flashes	The pedal is in pairing mode (left pedal only).
Flashes	The pedal is attempting to connect to the other pedal (Rally 210 only).
Flashes continuously	The pedal is charging.
Solid	Charging is complete.
Flashes	Updating the software.
Flashes 20 times rapidly	Software update complete.
Flashes 20 times rapidly	Software update failed.

NOTE: When the pedals are idle and using a secure connection, the LED flashes two times every five seconds. When the pedals are idle and using an open connection, the LED flashes three times every five seconds (Allowing Open Connections). For more information about open and secure connections on the Rally 110/210 pedals, go to the Owner's Manual at garmin.com/manuals/rally110210.

Rally™ 110/210

Previous Topic

Next Topic

Download PDF

Print Page

Status LED