Skip to main content

Installing the Handlebar Base to the Clutch-Clamp or Brake-Clamp Brackets

  1. Remove the two factory bolts on your clutch-clamp or brake-clamp bracket Callout number 1.


    NOTE: Both 1/4 in. standard and M6 bolts are included. Match the size of the factory bolts on your clutch-clamp or brake-clamp bracket.
  2. Thread the new bolts Callout number 2 through the handlebar base, spacers Callout number 3, and clutch-clamp or brake-clamp bracket.
  3. Tighten the bolts to secure the base.
GUID-E024D22C-EA17-40B3-A63F-E9535D86014B v9
October 2023
© 2021 Garmin Ltd.