Skip to main content

Mounting Your Device in an Automobile

NOTICE

Before mounting the device, check the local laws pertaining to windscreen mounting.

WARNING

This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, store the device out of direct sunlight.

WARNING

Do not use the suction cup mount on a motorcycle.

WARNING

See the Important safety and product information guide in the product box for product warnings and other important information.

NOTE: The automobile mount is not included with all device models. Go to garmin.com to purchase optional accessories.
  1. Plug the automotive power cable Call-out number one into the port Call-out number two on the device.

    Exploded view of the automobile mount installation with a callout
  2. Remove the clear plastic from the suction cup Call-out number three.
  3. Clean and dry your windscreen and the suction cup with a lint-free cloth.
  4. Press the suction cup to the windscreen, and flip the lever Call-out number four back toward the windscreen.
  5. Snap the cradle Call-out number five onto the suction-cup arm.
  6. Fit the bottom of your device into the cradle.
  7. Press the device into the cradle until it snaps into place.
  8. Plug the other end of the automotive power cable into a power outlet.
GUID-E024D22C-EA17-40B3-A63F-E9535D86014B v9
October 2023
© 2021 Garmin Ltd.