Pairing a Transceiver with a Descent Dive Computer
Before you use the transceiver for the first time, you must pair it with a compatible Descent™ dive computer using ANT® technology.
- Wake the transceiver from low power mode (Waking the Transceiver from Low Power Mode).
- On your Descent dive computer, select .
-
Select an option:
-
To add your own transceiver, select Add Your Tank, select your transceiver from the list, enter your transceiver ID, and select an option for gas consumption calculations.
NOTE: The transceiver ID is printed on the housing. -
To add another diver's transceiver, select Add Other Divers, select at least one transceiver from the list, and select Add.
-
When the pairing process is complete, the transceiver begins sending data, and it is ready to use on a dive. The next time the transceiver and dive computer are turned on and within wireless range, they connect automatically when you start a dive.
If you are diving with a group, you can pair up to 8 transceivers with the dive computer.