Waking the Transceiver from Low Power Mode
Out of the box, the transceiver is in low power mode. You must wake the transceiver from low power mode to pair and connect to it.
Select an option:
-
Install the transceiver on the first-stage regulator, and gradually open the tank valve to pressurize the regulator.
NOTE: This option is not available for Bluetooth® pairing. Bluetooth technology is disabled when the transceiver is pressurized. -
Twist the battery cover counter-clockwise 270 degrees, wait 30 seconds, then twist the battery cover clockwise until it is secure.
NOTE: The transceiver remains awake for two minutes before returning to low power mode.
The transceiver plays a tone when it wakes from low power mode and is ready to connect to your Descent™ dive computer (Pairing a Transceiver with a Descent Dive Computer) or phone.