-
Route the cable through the pole-mount adapter , and place the cable in the vertical slot along the base of the pole-mount adapter.
-
Screw the pole-mount adapter onto a standard 1 in. OD, 14 threads per inch, pipe-threaded pole (not included).
Do not overtighten the adapter on the pole.
-
Connect the cable to the antenna.
-
Place the antenna on the pole-mount adapter and twist it clockwise to lock it in place.
-
Use the included M3 set screw and a 1.5 mm hex wrench to secure the antenna to the adapter .
-
With the antenna installed on the pole mount, fill the remaining gap in the vertical cable slot with a marine sealant (optional).
-
Attach the pole to the boat if it is not already attached.
-
Route the cable away from sources of electronic interference.
