Going for a Ride

If you are using a wireless sensor or accessory, it can be paired and activated during initial setup (Pairing Your Wireless Sensors).

Hold to turn on the device.
Go outside, and wait while the device locates satellites.

The satellite bars turn green when the device is ready.
From the home screen, swipe left or right to change the biking profile (Home Screen Overview).
If necessary, select to complete your pre-ride checklist, and select .
Press to start the activity timer.

NOTE: History is recorded only while the activity timer is running.
Swipe left or right to view additional data screens (Adding a Data Screen).

You can swipe down from the top of the data screens to view the widgets (Customizing the Widgets).
If necessary, hold a data field and select or to edit the data field or data screen during the ride.
If necessary, tap the screen to view status overlay data (including battery life) or return to the home screen.
Press to stop the activity timer.

TIP: Before you save this ride and share it on your Garmin Connect™ account, you can select to change the ride type. Accurate ride type data is important for creating bike friendly courses.
Select Save.
If necessary, select Accept to confirm your ride gear.

TIP: You can add and delete gear in your Garmin Connect account.
Select .

Edge® 1060