You must mount the remote control in a location that is within 10 m (33 ft.) of the stereo.

You must mount the remote control in a location where it is not submerged.

If you need to mount the remote control outside the boat, you should mount it in a location where it will not be damaged by docks, pilings, or other pieces of equipment.

You should select a flat mounting surface for the best results.

The mounting surface must be free of dirt, debris, wax, or coatings.

Do not mount the remote control higher than 2 m (6.5 ft.).

After you select the location, hold the remote control in the selected location, press a few buttons, and confirm the operation on the stereo.

Move away from sources that can interfere with the remote control's operation. Sources of interference may include strong electromagnetic fields, some 2.4 GHz wireless sensors, high-voltage power lines, electric motors, ovens, microwave ovens, 2.4 GHz cordless phones, and wireless LAN access points.