Introduction
See the Important Safety and Product Information guide in the product box for product warnings and other important information.
Garmin® strongly recommends having an experienced installer with the proper knowledge of electrical systems install the device. Incorrectly wiring the power cable can result in damage to the vehicle, the battery, or the device and can cause bodily injury.
The device can improve situational awareness. It is not a replacement for driver attentiveness, good judgement, or checking mirrors and blind spots. Always maintain awareness of your surroundings, and operate the vehicle in a safe manner. Failure to do so could result in serious injury or death.
The device, including the sensor, must be securely mounted and must remain stable in all operating conditions. The mounting options outlined here may not be compatible with all vehicles and may require additional hardware. Failure to securely mount this device could result in poor product performance and could cause the device to detach from its mount, which could damage the device or the vehicle and could cause serious personal injury.
This device is intended only for recreational use on a racetrack. Never use this device on public roadways. Failure to follow this warning may result in an accident causing property damage, serious personal injury, or death. You are responsible for using this device in a safe and prudent manner.
If the radar device becomes dismounted or is not sending radar data, Garmin recommends that you stop driving and check the devices in a safe location. Failure to do so could result in serious injury or death.
Failure to install this device according to these instructions could result in serious personal injury, damage to the vehicle or device, or poor product performance.
Adverse weather conditions and wet driving surfaces may interfere with the operation of the device. Avoid using the device in these conditions.
Routinely inspect the device and remove any dirt, debris, or other obstructions. Failure to do so could result in poor product performance or may interfere with the operation of the the device.
To avoid possible personal injury, always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.
When drilling or cutting, always check what is on the opposite side of the surface to avoid damaging the vehicle.
These installation instructions do not apply to a specific vehicle type, and are meant as a guide when installing this product on your vehicle. For questions specific to your vehicle, you should contact the vehicle manufacturer.