Skip to main content

Pairing the Foot Pedal

The foot pedal is paired with the trolling motor at the factory, but you may need to pair them again if the connection is broken.

  1. Turn on the trolling motor.
  2. On the trolling motor display panel, press three times to enter pairing mode.

    on the trolling motor display panel illuminates blue as it searches for a connection.

  3. Bring the foot pedal within 1 m (3 ft.) of the display panel on the trolling motor.
  4. Connect the foot pedal to power using the power cable, or insert batteries to turn it on.
  5. Within 30 seconds of turning on the foot pedal, hold until the status LED on the foot pedal illuminates blue.
  6. Release .

    The status LED on the foot pedal illuminates blue as it searches for a connection, then turns off when it pairs successfully with the trolling motor.

    on the trolling motor display panel changes to green when the connection is successful.

GUID-A7668193-255A-4F7A-AAEC-C153FB825CB4 v2
November 2025
© 2025 Garmin Ltd.