Tools Needed

  • Phillips screwdriver

  • Electric drill

  • Drill bit (size varies based on surface material and screws used)

  • Rotary cutting tool or jigsaw

  • 25 A circuit breaker or inline fuse for the primary power cable

  • 1 A inline fuse for the ignition cable

  • Silicone-based marine sealant (optional)

  • Wire for power and ground cable extension. The required wire gauge depends on the length of the extension and the connected power source (Power Cable Gauge Guide).

  • 22 AWG (0.33 mm2) wire for ignition cable extension

GUID-93B550BE-32FB-4B88-B776-F28617ABA7D5 v4
August 2025