Important Safety Information
Failure to follow these warnings and cautions could result in personal injury, damage to the vessel, or poor product performance.
See the Important Safety and Product Information guide in the product box for product warnings and other important information.
This device must be installed according to these instructions.
Disconnect the vessel's DC power supply before making any modifications to it.
Before applying power to this product, make sure it has been correctly grounded according to these instructions.
You must review and follow the applicable important power considerations when selecting the power cable and fuse or circuit breaker. Using an incorrectly-rated power cable, fuse, or circuit breaker for your installation type may cause a fire or other potential issues that could result in serious personal injury, damage to the device or the vessel, or poor product performance (Important Power Connection Information for New Installations).
To avoid potential risk of fire, possibly resulting in serious personal injury or property damage, only replace fuses used in installation with the same type and rating.
To avoid possible personal injury, always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.
When drilling or cutting, always check what is on the opposite side of the surface to avoid damaging the vessel.
Do not use the stereo as a template when drilling the mounting holes because this may damage the glass display and void the warranty. You must only use the included template to correctly drill the mounting holes.
The installer is responsible for ensuring the installation complies with all applicable local, regional, and national regulations, standards, and best practices for marine electrical systems. You must verify that all wiring, circuit protection, grounding, and installation methods comply with the requirements for the vessel and installation location, including applicable standards such as ABYC®, ISO, RCD or other relevant marine electrical standards.
You must read all installation instructions before beginning the installation. If you experience difficulty during the installation, contact Garmin® Product Support.