Connecting the Fusion PartyBus Device to a Wireless Access Point
You can connect this device to a wireless access point on a router or compatible Fusion PartyBus™ device on the network. This device can connect using Wi‑Fi® Protected Setup (WPS), if it is supported by your access point. This device can connect using Apple® Accessory Configuration (WAC) using a supported Apple device.
-
Select
> SETTINGS > NETWORK > WI-FI CLIENT > SSID.
A list of wireless access points within range appears.
-
If necessary, select
PASSWORD, enter the password, and select
.
NOTE:
After you connect the stereo to a wireless access point, you cannot use the wired network connection.