Setting the Fusion PartyBus Device as a Wireless Access Point
Before you can connect additional Fusion PartyBus™ devices or smartphones to a Fusion PartyBus device wirelessly, you must configure one device as a wireless access point. This is not necessary if you installed a wireless router or other wireless access point on the network.
You should not configure this device as a wireless access point if you have a router installed on the network. Doing so may introduce DHCP conflicts and result in poor network performance.
For more detailed configuration instructions, see the owner's manual.
-
Select
> SETTINGS > NETWORK > WI-FI ACCESS POINT.
-
Select
> SETTINGS > NETWORK > ADVANCED > WI-FI AP SETTINGS > PASSWORDand enter a password for the wireless access point.
NOTE:
When you configure the stereo as a wireless access point, you can also use the wired network connection without changing any additional settings. The wired and wireless networks are bridged.