Configuring the Function Keys
The two keys labeled 1 and 2 on the keypad can be configured using a compatible chartplotter or a GHC™ 50 helm control connected to the autopilot system.
-
From the autopilot screen, select
> Autopilot Setup > Autopilot Keypad > Autopilot Keypad Configuration
-
Select an option:
-
To configure the key labeled 1, select Key 1.
-
To configure the key labeled 2, select Key 2.
-
- Select the function you want to assign to the key.
- Repeat this procedure for the other key, if needed.