Skip to main content

Pairing the Varia Radar Device with Your Edge 1030

The first time you connect the Varia™ RVR315 device to your Edge® device, you must pair both devices. After the initial pairing, the Edge device automatically connects to the radar device when you start your activity and the radar device is active and within range.
NOTE: The radar device is compatible with other Garmin® devices (Other Compatible Devices).
  1. Bring the Edge device within range (3 m) of the sensor.
    NOTE: Stay 10 m away from other ANT‍+® sensors while pairing.
  2. Turn on the Edge device.
  3. Select Menu symbol > Sensors > Add Sensor > Search All.
  4. While the Varia RVR315 device is turned off, hold the device key for 1 second to enter active mode.

    The status LED flashes blue, and the radar device turns on.

  5. Select your sensor, and select Add.

When the sensor is paired with your Edge device, the sensor status is Connected. The Radar device connection symbol (radar) status icon appears solid on the top banner of the home screen.

Copyright © Garmin. All rights reserved.GUID-8A0398B5-1411-401F-9A3B-6F9B956A122A v1