In-line Fuse Cable

WARNING

Garmin® strongly recommends having an experienced installer with the proper knowledge of electrical systems install the in-line fuse cable. Incorrectly wiring the power cable or the in-line fuse cable can result in damage to the vehicle or the battery and can cause bodily injury.

In many cases, you must install the included in-line fuse cable on the device power cable to protect the zūmo® navigator from excessive electrical current.


In-line fuse cable
  • You must install the included in-line fuse cable if you are connecting the power cable directly to the vehicle battery.

  • If you are connecting the power cable to an accessory power source or bus bar that already has a suitable fuse or a protective circuit, installing the included in-line fuse is not necessary.

  • When installing the fuse cable, you must connect it to the red system power cable using solder and heat-shrink tubing.

GUID-7E13E879-D2C7-4B0C-9E63-CD693B2E7042 v4
October 2024