Powered Motorcycle Mount

WARNING

See the Important Safety and Product Information guide in the product box for product warnings and other important information.

WARNING

Garmin® strongly recommends having an experienced installer with the proper knowledge of electrical systems install the device. Incorrectly wiring the power cable can result in damage to the vehicle or the battery and can cause bodily injury.

NOTICE

Do not disassemble the device or motorcycle mount, because doing so could damage the device or mount.

The device must be mounted in a suitable and secure location on your motorcycle, based on available power sources and safe cable routing.


Device mount and power cable with callouts

Callout number 1

Motorcycle mount connector

Callout number 2

10 to 30 Vdc system power (red)

Callout number 3

System ground (black)

NOTE: Additional parts are included with the device to provide more installation and wiring options. Contact an experienced installer for more information about using these parts with your motorcycle.
Crimp Style Ring Terminal
Connects the wiring harness directly to the battery terminal.
Cable Tie
Secures cables to the motorcycle frame.
In-line Fuse Cable
Protects the navigation device from excessive electrical current (In-line Fuse Cable).
GUID-7E13E879-D2C7-4B0C-9E63-CD693B2E7042 v4
October 2024