Skip to main content

Adjusting Windage and Elevation

The device mount includes a locking knob that prevents the mount from being adjusted unintentionally. You must loosen the lock knob before making adjustments. You must tighten the lock knob before taking a shot to prevent the mount from moving during use.

  1. Using a 3.5 mm (1/8 in.) hex wrench, loosen the lock knob.

    Mount adjustments with callouts
  2. Turn the dials to adjust windage Callout number one or elevation Callout number two.
  3. Tighten the lock knob until it snaps over one time.
    NOTE: Do not snap the lock knob more than once while locking the knob.
Copyright © Garmin. All rights reserved.GUID-693FA105-1B57-421A-AFE2-6D258F86A8B3 v2