Skip to main content

Mounting the Scope

The device mounts to a Picatinny or Weaver rail. The scope features a 62 mm (2.44 in.) eye relief. You should mount the device in a position that gives you a clear view through the scope while your cheek is on the cheek rest of the crossbow.

  1. Place the device onto the rail.
    TIP: You should make sure the lug on the bottom of the device is positioned between the grooves on the rail.
  2. Using the included screws and washers Callout number one, secure the mount clamp Callout number two to the device.

    Device mounted to a Picatinny rail with callouts
  3. Tighten the screws to a maximum torque specification of 2.5 N-m (22 lbf-in.).
Copyright © Garmin. All rights reserved.GUID-693FA105-1B57-421A-AFE2-6D258F86A8B3 v2