Status LEDs
|
LED |
State |
Description |
|---|---|---|
|
VHF TX |
Solid |
A connected VHF radio is transmitting. |
|
Error |
Solid |
The device has encountered a critical error. You can connect the device to a computer, and use the Garmin AIS™ 800 setup software to view detailed information about the warning condition. |
|
SRM |
Flashing |
Reserved for future use. |
|
Warning |
Solid |
The device detects a warning condition. You can connect the device to a computer, and use the Garmin AIS 800 setup software to view detailed information about the warning condition. |
|
RX Only |
Solid |
The device is in silent mode or not ready to transmit.
NOTE:
The
Garmin AIS 800 device does not transmit without a GPS signal or an MMSI number, when the AIS base station commands a quiet time, or when the device encounters a critical error.
|
|
TX |
Flashing |
The device is sending an AIS message. |
|
RX |
Flashing |
The device is receiving an AIS message. |
|
Power |
Solid |
The device is ready to transmit and receive. |
|
VHF TX, Error, Warning, and Power. |
Solid |
When these four LEDs are illuminated, the device is connected only to a computer for programming by a USB cable. |