If the Spy Pole™ mount is installed on a gunnel mount, you can stow or deploy it by manually
rotating the gunnel mount.
-
To stow the Spy Pole™ mount, unlatch the quick-release lever on the gunnel mount's horizontal
tube.
-
Rotate the Spy Pole™ mount until it is parallel to the water.
-
Relatch the quick-release lever to hold
the Spy Pole™ mount out of the water.
-
Pull one of the silver security pins
from the tube-connector bracket and push it through the concentric holes in the bracket
and horizontal tube.
The Spy Pole™ mount is securely stowed out of the water.
-
To deploy the Spy Pole™ mount, remove the silver security pin and return it to the storage hole on the
tube-connector bracket.
-
Hold onto the Spy Pole™ mount while you unlatch the quick-release lever.
-
Gently lower the Spy Pole™ mount into the water.
-
Relatch the quick-release lever.
The Spy Pole™ mount is deployed and ready to use.